It's Time to Party with Joy Clair Designs

Greetings friends and fellow crafters, LeeAnn here with a Shaker card I made using the Joy Clair Designs Party Animals stamp set.

Following these few easy steps, you too can make this shaker card. 

1. I started out by stamping out this cute little hungry pig and slice of cake with Memento Tuxedo Black ink. This is a dye ink which makes it easy to color with alcohol markers which is what I did. 

2. I used the plaid pattern paper from the Campfire and Lakeside paper pad and cut the swimming pool section out using the MFT die. 

3. Using Vintage Photo Distress Oxide I inked up the area on my cardbase where the pool will be. 

4. I sprinkled the Sweet Candy sprinkles in the mud hole, used Nuvo Deluxe adhesive to adhere the shaker element to the card base to enclose the sprinkles. 

5. I adhered the plaid paper do the cardbase and set about to cut out the pig and cake slice with my Scan n Cut. 

6. I attached the pick and cake slice using foam squares

7. I stamped out the sentiment using VersaFine Clair Nocturne ink and cut into a banner shape.

8. I added five drops of Nuvo Cocoa Blush and my project was complete. 

I made a second card with this stamp set and the following six steps are how I created this project.

1. For this card I first stamped out the cute little alligator image using Memento Tuxedo Black ink, this is a dye ink that dries quickly and allows for coloring with alcohol markers without bleed through. Next I used the Brother Scan n Cut to cut out the image.
2. I  used Artist Loft Alcohol Markers to color the alligator image.
3. I used Distress Oxide inks in Mermaid Lagoon, Peacock Feathers and Salty Ocean along with a Stampers Anonymous Stencil to ink blend the water spray.
4. I cut a panel using a  rounded stitched rectangle die, and stamped the sentiment using VersaClair Nocturne ink.
5. I added the alligator using foam squares.
6. Once attached I used Glossy Accents, on not only the alligators float but also the balloon.
7. Three Orange Nuvo drops up at the top and my project was almost complete.
8. The final step for my project today was to add the design panel to the card base using Tear-it Tape.


The stamp set I used and many more can be found at The Joy Clair Store
See the rest of the teams posts on our blog
Follow us on Pinterest and Instagram
Affiliate links are used at no extra cost to you. This helps me support my crafty life!!!

Party Animal Shop at: JCD	Nuvo Drops Gloss Ripend Pumpkin Shop at: KS	Mermaid Lagoon Distress Oxide Shop at: KS	Salty Ocean Distress Oxide Shop at: KS
Peacock Feathers Distress Oxide Shop at: KS	VersaFine Clair Nocturne Shop at: KS	Ranger Glossy Accents Shop at: KS	Sweet Candy Sprinkles Shop at: KS
MFT Pool Shaker Shop at: SSS	MFT Pool Die Shop at: SSS	PhotoPlay Campfire & Lakeside 6x6 Shop at: SBC	MFT Rounded Stitched Rectangles Shop at: SSS
Pixie Spray Shop at: KS	Nuvo Deluxe Adhesive Shop at: KS	Vintage Photo DIstress Oxide Shop at: KS	Scrapbook Adhesives Foam Squares Shop at: KS
Cocoa Blush Nuvo Jewel Drops Shop at: KS

Get Well Soon with Joy Clair Designs

Greetings friends and fellow crafters, LeeAnn here with a project I made using Joy Clair Designs, Spring Stroll stamp set.

I had a lot of fun making this card and following these steps you can as well:

1. Stamp the umbrella image five times using Memento Tuxedo Black ink. 

2. Color the images using rainbow colors. I used alcohol markers as the ink is alcohol friendly.

3. Using a the Mini Staggered Raindrops stencil from MFT, and Tumbled Glass Distress Oxide ink I created the background. 

4. After cutting the umbrella's using my Brother Scan n Cut, I adhered them to my panel using foam squares. 

5. I stamped the sentiment using VersaFine Clair ink in Nocturne. 

6. My panel was then attached to a light blue A2 size card base, and my project was complete. 

The stamp set I used and many more can be found at The Joy Clair Store
See the rest of the teams posts on our blog
Follow us on Pinterest and Instagram
Affiliate links are used at no extra cost to you. This helps me support my crafty life!!!

VersaFine Clair Nocturne Shop at: KS	Spring Stroll Shop at: JCD	Memento Tuxedo Black Dye Ink Shop at: KS	MFT Mini Raindrops Shop at: SSS
Distress Oxide Tumbled Glass Shop at: KS

All You Need is Love!!!

Greetings friends and fellow crafters. I feel so bad as here it is 2 days before Valentines Day and I am realizing my post for Maker's Movement did not publish.

I had so much fun using the Notes of Love Stamp set and the Special Delivery Die set to make this cute Valentine. Sit back and relax and I'll tell you how I did it.

I found the Recollections pattern paper I wanted to use for the envelope using the Special Delivery Die set, and ran it through my die cutting machine. 

I then ran the second die through the machine with Pink card-stock to be the front of my envelope. I used white card-stock for the "postage stamp" and the word Love. 

I also used White card-stock for my Valentine card which I cut with the label die, and then Kraft card-stock to be a backer layer for that. 

Once I had all my layers cut, I went to stamping. Using Memento Tuxedo black ink I stamped the arrows on the postage stamp and the sentiment on the card. I used Ladybug Red to stamp the Heart and word Love. Using New Sprout and Bamboo Leaves I stamped the wheat vine on either side of the sentiment.
Putting together the envelope was easy, the die set scores the paper while cutting out the shape. All that is needed is to crease on the folds, and add some double side tape along the two sides in the back, release the backing paper and adhere together.
I also used double side tape to adhere all my other panels together, and On Point Glue to adhere the die cut love to the front of the envelope. And with that my project is complete.

Unfortunately it appears the stamp set I used may not be available any longer, as it is not showing on the company website.

Affiliate links are used at no extra cost to you. This helps me support my crafty life!!!

VersaFine Clair Nocturne Shop at: KS	Memento Tuxedo Black Dye Ink Shop at: KS | IC	Recollections 110 lb Cardstock Shop at: MM	On Point Glue Shop at: IC	Special Delivery Die Set Shop at: MM

Friends Are Like Stars... Friendship Hop

Hi there friends and fellow crafters, LeeAnn here participating in Courtney's Friendship Hop.

I had so much fun creating this card.
First I cut a panel of Kromekoat paper (can use photo paper) with a stitched rectangle die and went about using Tsukeniko's Kaleidacolor ink pad in Blues to brayer the background. I added a spritz of water after to add to the look.
I then used a smaller rectangle die from the same set and stamped the sentiment from a Dovecraft stamp using VersaFine Clair ink in Nocturne. Once I let that ink dry, I spritzed it with Imagine Shimmer sprays Sparkle Shimmer.
I added bakers twine to my panel and wrapped twice tying a knot on the left side.
I then attached my sentiment panel using foam squares, and added this panel to my card base also using foam tape.
I added 5 yellow stars to my panel with On Point Glue and my project was complete.

I hope you enjoy all the projects brought to you in this hop. And see projects that inspire you to make your own friendship card.

NEXT UP... Renee and her awesome youtube video... click here!!!


Affiliate links are used at no extra cost to you. This helps me support my crafty life!!!

VersaFine Clair Nocturne Shop at: KS	Scrapbook Adhesives Foam Squares Shop at: KS	Sheer Shimmer Sparkle Spritzer Shop at: IC	Imagine Craft Mat Shop at: IC	Kromecote Paper Marco's Paper Shop at: M's
Kaleidacolor Blue Breeze Shop at: IC	Dovecraft Friends are Like Stars (sold out) Shop at: AZ	On Point Glue Shop at: IC	Yellow Star Sprinkles Shop at: KS

Thank You with Joy Clair Designs

Greetings friends and fellow crafters, LeeAnn here with a quick and easy project using the Doodle Flowers Stamp set from Joy Clair Designs.

As I said this was a quick and easy card to make. I chose the rainbow watercolor design pattern paper from a 6x6 paper pad from Bo Bunny called "Believe". I used a stitched rectangle die from KatScrappiness to cut the panel, and then using VersaFine Clair ink in the color Nocturne I stamped the flower spray as well as a couple extra sprigs.
I stamped the jar image using Memento Tuxedo Black ink and cut it out, and continued the flower spray and stems from the sprigs to appear to be in the jar.
I used a slanted sentiment die from MFT and stamped the sentiment using Catherine Pooler's Orange Twist ink.

The stamp set I used and many more can be found at The Joy Clair Store
See the rest of the teams posts on our blog
Follow us on Pinterest and Instagram


Affiliate links are used at no extra cost to you. This helps me support my crafty life!!!

VersaFine Clair Nocturne Shop at: KS	Doodle Flowers Shop at: JCD	Spring Stroll Shop at: JCD	Memento Tuxedo Black Dye Ink Shop at: KS
Bo Bunny "Believe" 6x6 Paper Pad Shop at: AZ	Catherine Pooler Orange Twist Shop at: SBC